Details

---

Allen gwynnes horizontal multistage pump feature sectional casing and closed impeller. The impeller, diffusers are interchangeable between stages. The structure of these pumps is compact and reasonable. This pump design features high efficiency and low energy consumption.

Technical Data

Capacity	:	110 m3/hr
Maximum Head	:	395 meters
Speed	:	3600 rpm
Temperature	:	Max 190 oC, depending on the shaft sealing and construction material
Casing Pressure	:	Max 40 bar, depending on the operating temperature
Shaft Seal	:	Gland Packing or Mechanical Seal
Flange Type	:	Suction Flange
Discharge Flange	:	DIN2501 PN16 / DIN2501 PN40
Direction of Rotation	:	Clockwise looking on shaft end

Application :

• Boiler Feed Water Plants
• Water Supply Plants
• Irrigation Plants
• Hot and Cold-Water Circulation
• Condensate Plants                
• Pressure Raising Plants
• Heating Plants
• Purification Plants
• Fire Fighting

Flanges :

1. Suction side flange PN16 (DIN2533) and the discharge side flange PN40 (DIN2535).
2. The flanges can be drilled to ANSI B16.1 class 250, on request.

Bearing :

One roller bearing on the shaft end side and two deep groove ball bearing on the discharge side, both lubricated by grease.