Details

---

The Allen Gwynnes OT pump is a side channel pump capable of handling gas along with medium and operates at a low noise level. This pump also very suitable for positive suction heads below 0.5 meter.

This series offers various material options with uniform dimensions and performance characteristics, along with exchangeable standard components. These pumps are used in applications such as the palm oil industry, pharmaceuticals, chemicals, and the petrochemical market. The AGOT design is optimized for low NPSH and positive suction head. This pump is particularly suitable for pumping liquids under vapor pressure, such as condensate, refrigerants, and boiler feed water.

Technical Data

Capacity	:	35 m3/hr (max)
Head	:	354 meters (max)
Speed	:	1800 rpm (max)
Temperature	:	120 oC (max) / 180 oC (max) for the standard material (Higher temperature design upon request)
Casing Pressure	:	PN 40
Shaft Sealing	:	Mechanical Seal
Flange Connection	:	DIN 2501/PN 40
Bearing Type	:	Deep grove ball bearing
Direction of Rotation	:	Anti-Clockwise (Looking on shaft end

Construction

• Max 40 bar from -40 oC up to +120 oC.
• Max 32 bar from +120 oC up to +180 oC.

Position of branches

• Axial suction branch, discharge branch points radially upwards.
• Flanges to DIN EN 1092-2/PN40.
• Flanges Design: DIN2512 with groove/Drilled ANSI 150 or 300